Electrical Projects
Disassembly

Pull the switch knob and the lever from the adapter. Withdraw the five case screws to release the clip and ring cover. Release the cord strain-relief and remove the wire nut connections to disconnect the cord set. Now you can remove the hose assembly from the case. The orifice with the motor assembly, heater, and thermostat assemblies, together with the switch and impeller, may be lifted from the case. Remove individual parts by disconnecting the wiring and removing the respective mounting screws.


Assembly

Assembly procedures are self-evident. However, the dryer should be checked for shock hazard. This requires an 1100V power supply. Apply high voltage for 1 minute with the ease cover removed. Test between the orifice and each male-plug terminal.





Page 1 2 3
Home > Electrical Projects > Repairs > Portable Hair Dryer

November 20, 2008