Electrical Projects To assemble, reverse the above procedure. Use Loc-Tite on the threads of the motor bolts to prevent the nuts from becoming loose through vibration.



The cleaner should be run for at least 15 minutes after reassembly. Test at 1100V for 1 minute between the prongs on the cord set and the casing. Check the vacuum by inserting the test gage in the swivel cap and block the rectangular hole in the top of the cap. The vacuum must be a minimum of 15 inches. Check the wattage qth the unit plugged into a 120V 60Hz power s urce. It must be a maximum of 700W or approximately 5.8A with the swivel cap inlet completely blocked





Page 1 2 3 4 5 6 7 8 9 10 11 12
Home > Electrical Projects > Repairs > Vacuum Cleaners

November 20, 2008