assure

Found 13 Results for assure.

Showing 1 to 10.

1. Art
He cannot assure you that these artists he selects will endure or that their works will multiply in value within a lifetime, as did those of a Pablo Picasso.
http://www.fun-home-projects.com/collecting/​art.html

2. Using A Banding Wheel
Some wheels are equipped with ball bearings, to assure smooth, free spinning, and generally the heavier wheels out-perform those of lighter weight.
http://www.fun-home-projects.com/crafts/​ceramics/​using_a_banding_wheel/​

3. Wax Resist
To assure complete coverage, apply another coat of black in the same way. Step 10 — Fire the piece to cone 05, then apply 2 coats of clear gloss glaze to the entire inside and outside of it, allowing drying time between coats; fire it again, this time to cone 06.
http://www.fun-home-projects.com/crafts/​ceramics/​wax_resist.html

4. Furniture - Upholstered Chair
To assure against movement of springs, sew them to webbing with coarse thread or light string. Replace dust cover.
http://www.fun-home-projects.com/household_repairs/​f/​furniture_upholstered_chair.html

5. Furniture - Table
To assure that joints are tight, nail a straight board to the floor or to a sheet of plywood.
http://www.fun-home-projects.com/household_repairs/​f/​furniture_table.html

6. Types Of Heat Measurement
It is vital to know when the correct amount of heat has been produced within a kiln, so that the heat treating, or firing, cycle can be stopped at the correct time to assure optimum results.
http://www.fun-home-projects.com/crafts/​ceramics/​firing_part_1/​types_of_heat_measurement.html

7. Firing Procedures
There are some things that must be taken into consideration, however, to assure correctly fired ceramic pieces. Just as a speedometer in the family car indicating that the car is capable of traveling at 120 miles per hour doesn't mean that it is safe for the driver to do so, a kiln able to attain a cone 06 temperature in just a couple of hours doesn't mean that is how rapidly the pieces should be fired.
http://www.fun-home-projects.com/crafts/​ceramics/​firing_part_2/​firing_procedures.html

8. Technique
Allowing the greenware to "season" in the mold will assure that the necessary degree of dampness will be uniform throughout the piece.
http://www.fun-home-projects.com/crafts/​ceramics/​surface_alteration_piercing/​technique.html

9. Equipment Needed
In addition, the total amount of clay to be removed should be scraped away a little at a time, not only to assure smooth carving, but to avoid unnecessary pressure being placed on the greenware by attempting to carve or incise to the total depth in one "go.
http://www.fun-home-projects.com/crafts/​ceramics/​surface_alteration_carving_and_incising/​equipment_needed.html

10. Technique
Be sure that the brush is repeatedly fully loaded, and allow just the slip and not the brush to touch the greenware, to assure even, narrow lines.
http://www.fun-home-projects.com/crafts/​ceramics/​surface_alteration_slip_painting/​technique.html


Page 1 2

Search Here:

Menu:
Home
Collecting
Crafts
Electrical Projects
Energy Savings
Hobbies
Home Ownership
Household Repairs