Found 10 Results for band.Showing 1 to 10.
1.
Surprise The Landlord
Band together and approach your landlord with ideas on how he can save energy. Suggest
that he replace inefficient systems, such as hot-water heaters that have a low recovery rate.
http://www.fun-home-projects.com/energy_savings/apartment_living/surprise_the_landlord.html
2.
Stand - Up Type Glazes, Part 3
This technique is best carried out on a round plate or round box lid, and is accomplished as follows:
A pencil is used to mark a wide
band around the edge of the piece.
http://www.fun-home-projects.com/crafts/ceramics/stand_up_type_glazes_part_3.html
3.
Clothing - Shirt
Insert collar in
band, making sure pins are in line. Pin ends of collar to
band.
http://www.fun-home-projects.com/household_repairs/c/clothing_shirt.html
4.
Doll
A single limb may come off when the hook to which it is attached becomes disengaged either from the rubber
band or from the mount inside the limb.
http://www.fun-home-projects.com/household_repairs/d/doll.html
5.
Applying Lustres
If only a
band of lustre is to be applied to the edge of a plate, the piece is centered on a banding wheel and the lustre applied while the wheel is in motion; the brush is withdrawn from the piece as soon as the coating appears smooth and even.
http://www.fun-home-projects.com/crafts/ceramics/decorating_with_lustres/applying_lustres.html
6.
Carving & Incising
Step 3 — Using the curved end of the clean-up tool, deeply incise the outlines of the individual grapes, the leaves and stems and the horizontal
band.
http://www.fun-home-projects.com/crafts/ceramics/surface_alteration_carving_and_incising/carving_amp_incising.html
7.
Finishing
Step 1 — Paint the lower portion of the piece, from the
band to the bottom, with 3 coats of tan regular underglaze color, carefully avoiding the designs, and brushing out the color so that it does not pile up in the incised lines.
http://www.fun-home-projects.com/crafts/ceramics/surface_alteration_carving_and_incising/finishing.html
8.
Centering
that a brush be well filled with color and a sponge be thoroughly saturated, so that the tool does not run dry before the
band is complete.
http://www.fun-home-projects.com/crafts/ceramics/using_a_banding_wheel/centering.html
9.
Sgraffito
By moving up and down the hand holding the sgraffito tool, while spinning the wheel, a
band of overlapping spirals can be sgraffitoed through color, for unusual borders.
http://www.fun-home-projects.com/crafts/ceramics/using_a_banding_wheel/sgraffito.html
10.
Winter - Moth
There are two types of traps available, one a plastic
band coated with a sticky substance, the other a product called Tanglefoot, sold in bulk, from which suitable bands are made.
http://www.fun-home-projects.com/hobbies/gardening/garden_pests/winter_moth.html