Found 14 Results for bottle.Showing 1 to 10.
1.
Garbage
A returnable soft-drink
bottle that makes many trips can save about 80 per cent of the energy required to make the equivalent number of throw-aways.
http://www.fun-home-projects.com/energy_savings/recycling/garbage.html
2.
Shopping
This type of
bottle can average 20 trips; you save money (because you get the deposit back) plus the energy needed to make new disposable bottles, cans or milk cartons.
http://www.fun-home-projects.com/energy_savings/recycling/shopping.html
3.
Stand - Up Type Glazes, Part 1
"Found" tools - brush handles, pencil erasers,
bottle caps, paper clips, etc. — can also he used to apply stand-up glaze, for many unusual and attractive effects; the only limit on the numerous methods of application is the ceramist's ingenuity.
http://www.fun-home-projects.com/crafts/ceramics/stand_up_type_glazes_part_1.html
4.
Cork
Cut a piece of waste cork or even a
bottle cork into tiny slivers (use a kitchen grater if you wish), mix with white shellac or clear lacquer and immediately spread into hole.
http://www.fun-home-projects.com/household_repairs/c/cork.html
5.
Furniture, Wood
Place a
bottle cap upside down directly over dent and rest a warm flatiron on top. If dent doesn't rise after several applications of heat, remove finish with steel wool and try again.
http://www.fun-home-projects.com/household_repairs/f/furniture_wood.html
6.
Setting The Anticipator
Take a hot-water
bottle to bed or use an electric blanket or eiderdown. If you heat with hot water, give the system enough time to recover in the morning after the setback period.
http://www.fun-home-projects.com/home_ownership/energy_economics/setting_the_anticipator.html
7.
Testing
Having obtained a small
bottle of indicator, you should proceed as follows.
About a quarter of an hour after irrigating or applying the nutrient solution to the growing medium in a hydroponic container, make a hole some four or five inches deep in the aggregate, near a plant.
http://www.fun-home-projects.com/hobbies/hydroponics/testing.html
8.
Tools
Many ordinary household items work very well, such as nut picks, metal pot scrubbers, spoons, forks, beverage
bottle caps - in fact anything that will produce the desired results.
http://www.fun-home-projects.com/crafts/ceramics/sgraffito/tools.html
9.
Sgraffito Methods
Since it is unlikely that the color will retain its moisture for the length of time necessary to complete even a simple design, the piece can be slightly dampened repeatedly, as necessary, by spraying it with water from a window cleaner type of
bottle, or a plant mister; the plant mister is preferred (it is available in most garden supply shops), since it produces a fine mist rather than a jet or spatter of water .
http://www.fun-home-projects.com/crafts/ceramics/sgraffito/sgraffito_methods.html
10.
Applying Lustres
To apply lustre to a flat object, such as a plate or tile, the following method is used: The brush is dipped half the length of the bristles into the lustre, then lightly pressed against the edge of the
bottle, to remove the excess.
http://www.fun-home-projects.com/crafts/ceramics/decorating_with_lustres/applying_lustres.html
Page 1 2