Found 11 Results for clockwise.Showing 1 to 10.
1.
How To Fix A Leaky Faucet
Wind the cord
clockwise from bottom to top.
(9) Re-set the bonnet and spindle but don't tighten the spindle in the seat.
http://www.fun-home-projects.com/energy_savings/hot_water_heater/how_to_fix_a_leaky_faucet.html
2.
Test Your Savings
The arrow indicates whether the dial is
clockwise or counter-clockwise.
.
http://www.fun-home-projects.com/energy_savings/lighting/test_your_savings.html
3.
Range, Gas
Then turn the screw
clockwise till the flame is three-quarters of the height of the flash tube leading to the burner.
http://www.fun-home-projects.com/household_repairs/r/range_gas.html
4.
Waffle Irons
Now turn element case on its back and remove the control shaft by turning it
clockwise. Catch the loose washer at the thermostat end of the control shaft.
http://www.fun-home-projects.com/electrical_projects/repairs/waffle_irons.html
5.
Table - Range
Now rotate the controls one at a time in a
clockwise direction. Continuity should be measured approximately midway between off and lo and throughout the entire span of each dial to hi.
http://www.fun-home-projects.com/electrical_projects/repairs/table_range.html
6.
Blenders
Bend the tabs on the lockwasher and turn the nut
clockwise to remove. The drive shaft has left-hand thread.
http://www.fun-home-projects.com/electrical_projects/repairs/blenders.html
7.
Floor Polishers
Duplicate the above procedure for removal of the left-hand spindle head; however, it must be turned in a
clockwise direction for removal.
http://www.fun-home-projects.com/electrical_projects/repairs/floor_polishers.html
8.
Vacuum Cleaners
(This nut has a left-hand thread; therefore, turn it
clockwise for removal.) Remove the washer, fan, fan spacer, diffuser, second fan, and
collar.
http://www.fun-home-projects.com/electrical_projects/repairs/vacuum_cleaners.html
9.
Window Fans
With the switch in, the blade must turn
clockwise when the operator is facing the front of the fan (blade side of the motor).
http://www.fun-home-projects.com/electrical_projects/repairs/window_fans.html
10.
Electric Heaters
If the variation is more than 10° below room temperature, set the control knob within this range on the faceplate and turn the thermostat adjustment screw
clockwise to open the circuit.
http://www.fun-home-projects.com/electrical_projects/repairs/electric_heaters.html
Page 1 2