Found 21 Results for filling.Showing 1 to 10.
1.
Ping - Pong Table
If
filling loose screw holes with plastic wood and generally tightening screws and metal braces does not help, cut a 3" board into 2' lengths.
http://www.fun-home-projects.com/household_repairs/p/ping_pong_table.html
2.
Plastics - Laminated
Just
filling the hole or burned spot with stick shellac might be better.
Stains.
http://www.fun-home-projects.com/household_repairs/p/plastics_laminated.html
3.
Porch, Masonry
Floor can be leveled by troweling on latex cement or by chipping out concrete in low spot to a depth of 1" and
filling with mortar of 1 part Portland cement and 3 parts sand.
http://www.fun-home-projects.com/household_repairs/p/porch_masonry.html
4.
Rug
If condition of floor contributes to the problem, take up rug and level the floor by sanding down high spots,
filling wide cracks, and padding low spots with newspapers.
http://www.fun-home-projects.com/household_repairs/r/rug.html
5.
Walk, Concrete
If walk is laid in sections, try raising the troublesome section witli a crowbar and
filling underneath with gravel.
http://www.fun-home-projects.com/household_repairs/w/walk_concrete.html
6.
Window Pane
There is no remedy but until pane is replaced you can keep out air by gradually
filling hole with Duco cement.
http://www.fun-home-projects.com/household_repairs/w/window_pane.html
7.
Annual Flowers
Before
filling the pots with soil, place a few rocks or clay pot shards in the bottom for drainage.
http://www.fun-home-projects.com/home_ownership/accessories_and_maintenance/starting_annual_flowers.html
8.
Clogged Drains
You can get better suction by putting a bit of Vaseline around the contact edge, and
filling the sink with hot water gives the tool a better grip.
http://www.fun-home-projects.com/home_ownership/safety_and_special_interest/clogged_drains.html
9.
Walls
Care must be taken that the entire stud space is filled — that no projections or cross-braces hinder the
filling process.
http://www.fun-home-projects.com/energy_savings/insulation/how_to_insulate/walls.html
10.
Technique
Apply the thinned color to the design,
filling the areas enclosed by the raised outlines.Working in this manner, apply washes of color to the design areas, as follows: birds' heads, backs, wings and tails.
http://www.fun-home-projects.com/crafts/ceramics/surface_alteration_slip_painting/technique.html
Page 1 2 3