Found 13 Results for fitting.Showing 1 to 10.
1.
Grounding Of Equipment
Use an adapter
fitting.
2.
http://www.fun-home-projects.com/electrical_projects/grounding_of_equipment.html
2.
Your Stove
Buy pots and pans that are bright and shiny, with straight sides and flat bottoms and tightly
fitting lids.
http://www.fun-home-projects.com/energy_savings/savings_in_the_kitchen/your_stove.html
3.
How To Solder Metal
To solder copper pipe into a plumbing
fitting, clean both pipe and
fitting and brush on an acid flux.
http://www.fun-home-projects.com/household_repairs/basic_methods/how_to_solder_metal.html
4.
Pipe, Water - Copper
Tighten the nut on the
fitting with a wrench. If this doesn't stop leak, drain the pipe, loosen nut completely, pull joint apart and make sure it is clean and properly aligned, then retighten nut.
http://www.fun-home-projects.com/household_repairs/p/pipe_water_copper.html
5.
Pipe, Water - Steel
Don't try to tighten
fitting or pipe; you may only aggravate the problem. For a temporary repair, drain the pipe and dry
fitting with a torch.
http://www.fun-home-projects.com/household_repairs/p/pipe_water_steel.html
6.
Floor Polishers
Inspect the floor brush
fitting. Replace if necessary.
http://www.fun-home-projects.com/electrical_projects/repairs/floor_polishers.html
7.
Instructions For Insulating Framed Walls
Pull the vapour barrier on the cut side to the other stud,
fitting the insulation behind it, and staple through the vapour barrier to the stud.
http://www.fun-home-projects.com/energy_savings/insulation/how_to_insulate/instructions_for_insulating_framed_walls.html
8.
Brushes For Lustres
Cleaned brushes are stored in a manner to keep them dust free, wrapped in household plastic wrap, placed in a box with a tight
fitting cover, etc.
http://www.fun-home-projects.com/crafts/ceramics/decorating_with_lustres/brushes_for_lustres.html
9.
Pruning Shrubs
All shrubs and trees
fitting into Group One make their flowering wood during the summer and early fall and bear blossoms the following spring.
http://www.fun-home-projects.com/hobbies/gardening/pruning/pruning_shrubs.html
10.
Brakes
—Squeal in brakes may be due to: (1) rivets protruding through lining and touching the drum; (2) dirt; (3) drum out of round; (4) shoes bent and not
fitting the contour of the drum; (5) loose spindle bushings.
http://www.fun-home-projects.com/household_repairs/e/engine_gasoline/brakes.html
Page 1 2