flashing metal

Found 17 Results for flashing metal.

Showing 1 to 10.

1. Planter
But a better remedy —possible with rectangular planters but difficult with round tubs—is to make a liner of copper flashing metal.
http://www.fun-home-projects.com/household_repairs/​p/​planter.html

2. Roof, Clay Tile
Slip a piece of aluminum or copper flashing metal under the tiles over the hole and hold in place with asphalt roofing cement applied to underside.
http://www.fun-home-projects.com/household_repairs/​r/​roof_clay_tile.html

3. Roof, Wood Shingle
Slip a piece of aluminum or copper flashing metal up under the shingle over the hole and hold it in place with asphalt roofing cement.
http://www.fun-home-projects.com/household_repairs/​r/​roof_wood_shingle.html

4. Weatherstripping And Caulking
It's called a draft gauge and all you need is a metal clothes hanger, a plastic sandwich bag (or a piece of light tissue paper), a pair of scissors and two clothes pins.
http://www.fun-home-projects.com/energy_savings/​weatherstripping_and_caulking.html

5. Automobile Body
Then let metal dry for 24 hours or longer if possible. Then spray two coats of Rust-Oleum 769 Red Primer into the panel with Snorkel kit sold by the paint manufacturer.
http://www.fun-home-projects.com/household_repairs/​a/​automobile_body.html

6. Boat, Aluminum
Clean metal with steel wool and fill hole from both sides with plastic aluminum. Large holes, tears.
http://www.fun-home-projects.com/household_repairs/​b/​boat_aluminum.html

7. Column, Wood
Slip a sheet of aluminum or copper flashing over top, bend it down around the edges and tack. Base rotting.
http://www.fun-home-projects.com/household_repairs/​c/​column_wood.html

8. Copper
Clean metal thoroughly, apply flux and heat with a torch. Then run in solder.
http://www.fun-home-projects.com/household_repairs/​c/​copper.html

9. Door, Garage
Then install metal door brace with turnbuckle (see door, screen). Top edge of out-swinging door rotting.
http://www.fun-home-projects.com/household_repairs/​d/​door_garage.html

10. Flashing, Aluminum
Chimney flashing buckled or loose. Force together seams that have come apart, crimp edges, and seal with plastic aluminum.
http://www.fun-home-projects.com/household_repairs/​f/​flashing_aluminum.html


Page 1 2

Search Here:

Menu:
Home
Collecting
Crafts
Electrical Projects
Energy Savings
Hobbies
Home Ownership
Household Repairs