moisture

Found 157 Results for moisture.

Showing 1 to 10.

1. Mosaics
The glass or vitreous type of tile is unlikely to absorb or lose moisture, and therefore can be used to make articles which are intended to be liquid-proof.
http://www.fun-home-projects.com/crafts/​mosaics.html

2. Humidifiers
HUMIDIFIERS A humidifier puts moisture back into the air and increases the comfort in our centrally heated houses. Very low humidity irritates nasal tissue, and dries out both skin and furniture.
http://www.fun-home-projects.com/energy_savings/​humidifiers.html

3. Weatherstripping And Caulking
Both you and your furnace need some fresh air coming into the house — also to clear out odours and moisture.
http://www.fun-home-projects.com/energy_savings/​weatherstripping_and_caulking.html

4. Openings That Shouldn't Be There
• Don't close off louvers in the attic and crawl spaces because they're needed for ventilation to prevent moisture build-up.
http://www.fun-home-projects.com/energy_savings/​openings_that_shouldn_t_be_there.html

5. Electric Clothes Dryer
In winter, you may want to vent into the basement to add moisture to the air. Put a nylon stocking over the vent to catch the lint.
http://www.fun-home-projects.com/energy_savings/​electric_clothes_dryer.html

6. Types Of Insulation
This barrier is a protective coating on one side of the insulation — using wax, tarred kraft paper, aluminum foil or plastic — to guard against moisture damage which would reduce the insulation's effectiveness.
http://www.fun-home-projects.com/energy_savings/​insulation/​types_of_insulation.html

7. The Vapour Barrier
Without it, moisture from the house air will enter the insulation, condense and cause serious damage. Some insulation is sold with an attached vapour barrier.
http://www.fun-home-projects.com/energy_savings/​insulation/​the_vapour_barrier.html

8. Casting Greenware
When the lowering action in the solid-casting mold (the handle) begins to slow, do not add more slip, but allow this mold to stand until it has absorbed the moisture from the slip in it.
http://www.fun-home-projects.com/crafts/​ceramics/​casting_greenware.html

9. Surface Alteration - Piercing
During the 18th century, Wedgwood produced pottery cheese molds having pierced sides and bottom, to allow the moisture to escape when the pieces were filled with curds and whey.
http://www.fun-home-projects.com/crafts/​ceramics/​surface_alteration_piercing/​

10. Stand - Up Type Glazes, Part 1
If the glaze is too thin, some moisture may be removed, as follows: pick up the glaze on a palette knife and spread it on a clean piece of newsprint paper (just like buttering bread), then quickly scoop it up and return it to the tile.
http://www.fun-home-projects.com/crafts/​ceramics/​stand_up_type_glazes_part_1.html


Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Search Here:

Menu:
Home
Collecting
Crafts
Electrical Projects
Energy Savings
Hobbies
Home Ownership
Household Repairs