windings

Found 11 Results for windings.

Showing 1 to 10.

1. DC Motors
The types of dc motors vary according to the way the field windings are connected. Series Motors.
http://www.fun-home-projects.com/electrical_projects/​tools/​dc_motors.html

2. AC Motors
The stator consists of two windings: a main or running winding and a starting winding. The starting winding is wound on the auxiliary poles.
http://www.fun-home-projects.com/electrical_projects/​tools/​ac_motors.html

3. Universal Motors
However, the motor has been designed so that when alternating current is applied to the motor, the magnetic fields from the armature and the field windings cause the armature to turn.
http://www.fun-home-projects.com/electrical_projects/​tools/​universal_motors.html

4. Motor Controls
Consider the speed control of a motor using a multiposition rotary switch and a series of field windings. As the rotary switch is turned towards the position marked "MAX," the number of field windings is increased, the magnetic field around the armature becomes greater, and the speed of the motor increases.
http://www.fun-home-projects.com/electrical_projects/​tools/​motor_controls.html

5. The Volt - Ohm - Milliammeter
Since you are not after a precise resistance reading at this point, it is important only to have the range setting low enough to indicate when there is some internal resistance within motor-powered appliances (caused by the windings on the armature).
http://www.fun-home-projects.com/electrical_projects/​tools/​the_volt_ohm_milliammeter.html

6. Power Supplies
Output is limited by the transformer's windings. .
http://www.fun-home-projects.com/electrical_projects/​tools/​power_supplies.html

7. Multivoltage AC / DC Power Supply
The load current rating of each of the windings if 0.5A.
http://www.fun-home-projects.com/electrical_projects/​tools/​multivoltage_ac_dc_power_supply.html

8. Electric Food Grinder
Check for burned, shorted, or open windings in the armature and the field coils. To check for leakage, with the switch closed apply 500V ac between both plugs connected together and exposed metal parts.
http://www.fun-home-projects.com/electrical_projects/​repairs/​electric_food_grinder.html

9. Fans
Install the rear bearing bracket on the field coil, taking care not to damage the windings. Install the field coil into the front cover, guiding the wound fields into position with the tabs of the front cover.
http://www.fun-home-projects.com/electrical_projects/​repairs/​fans.html

10. Window Fans
Depending upon the position of the in-out switch, either the wire marked "CC" or the wire marked "CW" is given a return path from the connection of the two motor windings, through the switch, and back to the appropriate winding.
http://www.fun-home-projects.com/electrical_projects/​repairs/​window_fans.html


Page 1 2

Search Here:

Menu:
Home
Collecting
Crafts
Electrical Projects
Energy Savings
Hobbies
Home Ownership
Household Repairs